GRAPHISOFT supplies ArchiCAD, BIMx, Microsoft Office and some utilities without the need of activations On the source (original) Mac, make sure that you have a backup copy and appropriate license for third-party software not supplied by GRAPHISOFT before migrating.Make sure its power adapter is connected and plugged in.You can run it directly from the command prompt.įor example, you can copy the file example.txt from your Raspberry Pi's (ip-address 169.254.104. You need to download it, but there is no need to Use the program pscp on your Windows PC to transfer data to the RPi.

if you were not connected to a LAN before) (advice: in my experience you get such a link-local address on your Windows PC, if no other IP-address was assigned to theĮthernet interface since rebooting, i.e. Otherwise, change the ip-address of your Raspberry Pi to have both in the same subnet. Run ipconfig in the command prompt of your Windows PC and look for the IP-address. Make sure that the ip-address of the ethernet interface of your windows machine is in the same subnet as the RPi.I assume you will be able to carry out this command either directly on the RPi, by attaching monitor, mouse and keyboard or byĬonnecting via ssh from another machine on your WiFi. You can find the IP-address of the RPi via ifconfig eth0 (replace eth0 with the name of your ethernet interface). Normally this will be a self-assigned link-local IP-address Here is what you could try (expanding on the comment by Seamus):Ĭonnect Raspberry Pi and Windows PC by Ethernet cableįind out IP-address of Ethernet interface of the Raspberry Pi.

How to transfer data pc to mac ethernet